Fuel additive converting kerosene to diesel fuel

Designed to obtain fuel with similar indicators of diesel fuel standards, from kerosene of any brands. Namely, the indicators for lubricating (antiwear) and cetane properties correspond to diesel fuel. The additive tests were carried out on jet kerosene. 1. The wear scar diameter of jet kerosene is 670 µm (very poor lubricating properties). After adding the additive in a volume of 0.1% (1 liter per 1000 liters of kerosene), the WSD decreased to the level of 410 microns (high lubricating properties). According to the standard, the wear scar diameter of ​​diesel fuel should not exceed 460 µm . 2. The cetane number of jet kerosene is 44 (very low). After adding the additive in a volume of 0.1% (1 liter per 1000 liters of kerosene), the cetane number increased by 50 (almost the same as summer diesel fuel with a cetane number of 51 and surpasses everything in winter diesel fuel with a cetane number of 47). The additive allows the use of any brands of kerosene, as a substitute for diesel fuel in winter, but also in summer conditions, as a separate fuel and is used in mixtures in any proportions with diesel fuel in an internal combustion engine of commercial vehicles, diesel generators, any heating systems, and so on.

The recommended usage: 0.01%

We provide shipments to Belarus, Kazakhstan and the countries of the FSU and beyond