Request a call+7 (81368) 552-85

PRODUCTS ECOCHEMTRADE

Bleaching fuel agent additive BleachingX

For dark diesel fuel, dark gas condensate, dark petrols and waste industrial oil

Used oil refining and desulfurization catalyst

Designed for introduction into spent engine oil, pyrolysis fuel from rubber and plastic waste (with high density) before distillation. Helps to block the formation of carbon particles and ash in the gas phase, reduce sulfur content in the distillate and protect equipment from carbon deposits. As well as receiving light yellow oil at the outlet of the condenser. As a result, the oil distillate is not subjected to an additional bleaching process using sulfuric acid and bleaching additives, which allows to optimize the time and economic component of the regeneration process.

The recommended usage: 0.3% to 0.5%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

Crude oil refining catalyst

Designed for use at mini refineries that do not have hydrotreating. As a result of using the method of introducing into crude oil before distillation, in the range of 0.3% -0.5% (depending on the quality of the crude oil), gasolines and middle distillates turn out to be of better quality and do not darken in the future. The sulfur content in the fuel is reduced to 70%. The properties of the catalyst are that blocking in the bottom residue of unsaturated hydrocarbons and aromatic compounds and sulfur compounds occurs. As a result, vapor condensation occurs in cleaner conditions.

The recommended usage: 0.3% to 0.5%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

BleachingX-Neo additive

Used for bleaching, antioxidation and deodorization of oil, fuel, using sulfuric acid. Such types as oxidized diesel fuel, pyrolysis fuel from rubber or plastic, distillates of used motor oil, dark base oil. It is an analogue of the BleachingX additive, but it has a number of indisputable advantages. Namely:
1. Very high reactivity, due to which the reaction of clarification of fuel or oil occurs instantly.
2. Reducing the dosage of the additive due to the low density and viscosity.
3. The maximum reduction of polymerization in fuel or oil, bleaching products do not have turbidity after the use of additives.
4. The cleaned oil or fuel does not precipitate in the form of colloidal masses, which prevents the cleaning of the capacitive park.

The recommended usage: 0.1% to 0.2%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

BleachingX additive

Used for bleaching, antioxidation and deodorizing oil or fuel using sulfuric acid. Such types as, black diesel fuel, pyrolysis oil from waste rubber and plastic, vacuum distillates used engine oil, dark base oil.

The recommended usage: 0.2% - 0.4%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

BleachingX-Eco additive

Used for bleaching, regeneration of used industrial oils without the use of SULFURIC ACID. Such as the type, hydraulic, turbine, machine tool, etc.

The recommended usage: 0.2% - 1%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

Diesel fuel antioxidant additive

Antioxidant additive is used in the production of all types of diesel fuel, vacuum gas oil, as well as in the production of base oil. Prevents the darkening of the resulting fuel in a mini refinery. It is used on oil depots for long-term storage of fuel by stabilizing it by inhibiting the process of oxidation and highlight resin.

The recommended usage: from 0.025% to 0.05%

Pyrolysys oil deodorizer. Chemical for removing bad smell from pyrolysis oil

BleachingX-Deodorizer additive

Used to remove bad odor from all types of pyrolysis oils and fuels. Also for any oil dark and light medium distillate fractions, gas condensate and so on. After applying the additive oil, the fuel has a neutral smell. The additive does not contain flavors. It is applied by mixing in the storage tank or by dosing in the stream.

The recommended usage: 0.025% - 0.1%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

Pyrolysis oil deodorizer

Pyrolysis oil deodorizer

Designed to remove bad smell, such as hydrogen sulfide, mercaptans, the smell of burning in diesel fuel, gasoline, gas condensate, heating oil and pyrolysis oil. Excellent dissolution and quick reaction when mixed with fuel, oil.

Dosage range from 0.01% to 0.05%.

BleachingX-Extra

Used for bleaching the paint of diesel fuel or gasoline.(Heating oil)

The recommended usage: 0.025% - 0.03%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

BleachingX-Engine

Used for pre-treatment of used engine oil, it works only in combination with a demetallization additive. Purified oil can be used for the production of lubricants.

The dosage is 0.5%

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

Demetallization and deashing agent (ash content removing)

The additive is designed to remove heavy metals and aging products (soot). Purification of the oil can be used as furnace fuel, including for the production of low-viscous bunker fuel.

The technology of additive production for sale.

Dosages range from 3% to 5%

Heavy oil pour point depressant

It is used to lower the temperature of fluidity of oil with a high content of paraffin wax fractions, fuel oil, bunker oil of any brand, heavy vacuum gas oil, as well as VAT residue in the production of pyrolysis oil. It is applied by mixing in the storage tank or by dosing in the stream.

The recommended consumption is 0.1% -0.15%

BUY

Water-diesel emulsifier/emulgator

Designed to obtain a stable water-diesel or water-oil emulsions with a water content of up to 50%. This water-emulsion fuel is well suited for burning on any diesel and oil burners. Also applicable for use on diesel internal combustion engines (diesel generators and so on). As a result of burning water-fuel emulsion, the boiler equipment is cleaned from soot, the emission of harmful substances into the atmosphere is reduced from 40% to 60%, and most importantly, money is saved for the purchase of diesel fuel. An important aspect, water-fuel emulsion can be made at home without using cavitation or ultrasonic technology, which greatly simplifies its production and use. Emulsifier dosages will be only 0.5% with respect to water (For 1000 liters of water, only 5 liters of emulsifier). The resulting water is successfully mixed in the right proportions with diesel fuel or oil. The stability of such an emulsion can be up to 1 week. In case of longer storage of the emulsion, mix again and use as intended.

Recommended dosages of water in diesel or oil. Internal combustion engine (Diesel generators and so on) - 10% -15% (without loss of power) Boiler equipment - 20% -35% (without loss of power)

Recommendation. Prepare a specific volume of the emulsion and use within 24 hours.

Production of water-heavy fuel emulsion. As an alternative fuel in boiler rooms, water-heavy fuel emulsion is used, which requires capital investment to purchase expensive cavitation equipment. Industrial tests of a water-fuel emulsifier have shown very good miscibility and stability of such an emulsion. Ease of introducing emulsion water into the oil stream using a gear pump. The optimal dosage of water is from 10% to 15%. The same water-fuel emulsifier will help to obtain a homogeneous structure and prevent delamination for already-flooded fuel oil.

BUY

Heavy fuel oil-water emulsifier

Designed to obtain a stable water-oil emulsion in the conditions of an oil base or boiler house without the use of expensive cavitation equipment and the use of electricity for water heating. As a result of receiving the emulsion, fuel oil has higher environmental performance, preventing pollution of the boilers, higher calorific value with full combustion of fuel. And most importantly, cash savings of up to 15% per 1 ton of fuel oil. The process of preparation of the emulsion is performed in a tank for storing fuel oil by mixing emulsion water and fuel oil through a gear pump. It is also possible to stabilize the fuel oil already watered earlier and to obtain a stable homogeneous structure.

The recommended emulsifier consumption is 0.5% by volume of water. The recommended water consumption for fuel oil is 15% (without loss of power).

BUY

Tyre pyrolysis oil desulfurization catalyst

The catalyst is used for deeper processing of raw tyre pyrolysis oil on distillation systems and production of a commercial product. The process is performed in two stages.

  • 1. Using the bleaching method BleachingX additive, as a result, the oil is cleaned and has no contaminants.
  • 2. Distillation on desulfurization catalysts.

This allows to increase the life of the catalyst. Due to their chemical properties and the porosity of the catalyst, these two processes allow the sulfur content of the oil to be removed to 70%, to obtain a stable color of the fuel and to remove the pungent smell.

BUY

Petroleum dyes

Designed to visually monitor different types of fuel or oil during storage, to prevent theft. And also for branding products for oil refining companies.

Recommended dosage from 0.01% to 0.02%

BUY

Atactic Polypropylene modified bitumen

We offer for sale APP modified bitumen of our own production. Export to EU countries is possible. Packaging is discussed according to customer specifications.

We provide shipments to Ukraine, Belarus, Kazakhstan and the countries of the FSU and beyond

Packaging

IBC plastic container

Contacts

EcoChemTrade © 2015 - 2018 | MediaStart